aceco sandrail

vw sandrail street legal

Aceco Sandrail Info

2000 Long Travel Aceco Sandrail 2 seater Rail Price: 16,000 OBO.

Motor, clutch, pressure plate & shocks were completely rebuilt/replaced in late 06. CV's & boots were done in 07. 2.0 Fox coils in rear & 2.0 airs in front. Aceco Sandrail Front and rear limit straps.

Aceco Sandrail Type IV motor with CB fuel injection, 9:1 compression. Call for more info 002 5 rib built trans with sway-a-way axles and 930 CV's w/ chromoly cages.

Aceco Sandrail with New gel battery, throttle cable & New CNC Slave cylinder Garmin GPS, Spal fan, battery kill switch, turning brakes, 2 sets of lazer star lights (1 flood & 1 spot), 1 set of Eagle HID's.

Aceco Sandrail Green sticker and California title. Pink slip in hand. Rail runs $185 per year to insure (Foremost). Car is turn key and ultra reliable. Fits in the trailer w/ the paddles on! (dim see below). There is room to spare in my 04 30' trailer.

All Aceco Sandrail dimensions are with sand tires! Front tire to tire width = 75 3/4", rear width = 89", tail to tip of front tire = 13'-0" / 156" and +1" for the front bumper = 13'-1". Aceco Sandrail Driven in backwards with the paddles on, the rail will fit in a toy hauler with 11'-9" of clear space to the 1st cabinet. Probably 11'-6" or less with street tires. Wheel base is 110" Drivers compartment rail to rail width is 47" Car comes with spare parts also.....belt, pulley, 930cv, boots, etc....

Aceco Sandrail Car is located in Irvine, For more pictures and videos see: http://s226.photobucket.com

Price is 16,000 OBO

OR, I'll trade work for the rail (Exterior Painting, Replastering a pool or concrete resurfacing)

Original from : www.thesamba.com

Article you may be Interested In Reading: Sandrails

sandrails

sandrails for sale

Sandrails Feature sample

A simple sandrails buggy. Features 2-speed remotely controlled gearbox, live rear axle and lights.

Datasheet :

Completion date : 23/11/2008
Power : electric (Power Functions)
Dimensions : length 47 studs / width 25 studs / height 25 studs
Weight : 1.08 kg
Suspension : front: independent with shock absorbers / rear: live axle on shock absorbers
Motors : 2 x PF Medium

A simple sandrails (subcategory of buggies), built basically to test my live axle concept. A live axle is an axle that has no fixed attachment to the frame of the vehicle. Instead, it is connected by a system of links and supported by shock absorbers. Live axle suspensions are usually complex, but offer very good stability and excellent performance, comparable to those of a typical independent suspension. And just like the independent suspension, live axle does not let the vehicle’s weight affect the drive train, which means that it performs better in heavy vehicles that the pendular suspension does, because the weight doesn’t generate extra friction on the drive train components (except wheels, of course).


In Lego, a very complex live axle systems exist, with probably the most extreme exampleavailable here. There for my goal was rather to create something as simple as possible sandrails. I ended up with an axle suspended on 4 links and a driveshaft only - a solution that turned out to blend simplicity with reliability pretty well. It had two minor drawbacks: it was slightly affected by the driveshaft’s torque, just like the pendular suspensions are, and the driveshaft could be theoretically affected by the vehicle’s ( sandrails ) weight to some extent while maing a turn or climbing certain obstacles. Despite that, this suspension system worked far better that I could expect.

Another note able feature was the use of the direction sensitive gearbox I have developed earlier. It was braced by lift arms here, and allowed the vehicle to be driven only forwards. It did work as expected, but the liftarmic frame turned out to be somewhat loose, and did not deliver the kind of performance that traditional bricks could.

The model was built with minimal attention to the aesthetic side, I just wanted it to look realistic, not pretty. Therefore I’ve used rather unusual palette of colors, and did not intend to film the vehicle ( sandrails ).

The LUGPol community, however, showed much interest in the suspension concept, and persuaded me into filming it, so I’ve eventually published a video titled Live Axle, to emphasize the fact that it was the suspension concept that was important, not the actual car ( sandrails ).

CopyRight by : www.brickshelf.com

Article you may be Interested In Reading: Sand rail

sand rail

sand rail frames

Sand Rail Products Type

Sand Rail Products Sampel :


Sand Rail Products First Type a Dominator LT-5 LS1 :

1. Power Supply :
   
   • LS1 Engine 5.7L 440 HP
     
   • 2D Mendeola Transmission
     
   • 935 CV Joints
   
   
2. Description :
   
   • Fully Built out of 4130 Chromoly
     
   • 5 passenger
     
   • Side Panels, Wing Trunk, Roof, Center cover & Radiator Cover
     
   • Carbon Fiber Dash w/ Autometer Gauges
     
   • Neri Style Suspension Seats w/ Adjustable HeadRest
     
   • DJ Safety 5 pt. Harness
     
   • ACRO Lights
     
   • CNC Hydraulics Dual Master Cylinders
     
   • 4 Wheel Disc Brakes
     
   • King Shocks (4 Corner Dual ByPass)
     
   • Sand Tires Unlimited
     
   • Douglas Billet BeadLock Wheels
     
   • Power Steering w/ Heavy Duty Rack & Pinion and Charlyn Pump
     
   • Chrome Package

Sand Rail Products Second Type a Dominator LT-5 :

1. Power Supply :
   
   • Eco tech Engine
     
   • 091 Bus Transmission
   
   
2. Description :
   
   • Fully Built out of 4130 Chromoly
     
   • 5 Passenger
     
   • Side Panels, Wing Trunk & Roof
     
   • Custom Console w/ Autometer Gauges
     
   • Neri Style Suspension Seats
     
   • DJ Safety 5 pt. Harness
     
   • ACRO Lights
     
   • CNC Hydraulics
     
   • King Shocks
     
   • Rear Disc Brakes (4 Piston caliper)
     
   • Sand Tires Unlimited & Douglas Wheels
     
   • Heavy Duty Rack & Pinion Steering

Sand Rail Products Third Type a Dominator FLT-5 :

1. Power Supply :
   
   • LS2 Engine 6.0L 550 HP
     
   • S4 Sequential Transmission
     
   • 935 CV Joints
   
   
2. Description :
   
   • Fully Built out of 4130 Chromoly
     
   • 5 passenger
     
   • Side Panels, Wing Trunk, Roof, Hood, Front Inclosure, WindShield, Dash Board w/ Center Console, Inside Panels, Center Cover & Radiator Cover
     
   • Autometer Gauges
     
   • Neri Style Suspension Seats w/ Adjustable HeadRest
     
   • DJ Safety 5 pt. Harness
     
   • ACRO HID Lights
     
   • InterCome & Radio
     
   • CNC Hydraulics Dual Master Cylinders
     
   • 4 Wheel Disk Brakes
     
   • King Shocks (4 Corner Dual ByPass)
     
   • Sand Tires Unlimited
     
   • Douglas Billet BeadLock Wheels
     
   • Power Steering w/ Howe Rack & Pinion Sweet Mfg. Pump
     
   • Chrome Package

Article you may be Interested In Reading: Off Road